Microphone input
Locking XLR with 18V phantom power. Push clip to unplug.
Power
9V DC IN/OUT from either socket. 9V DC OUT up to 5 pedals.
Power
9V DC IN/OUT from either socket. 9V DC OUT up to 5 pedals.
Output
Standard 1/4’’ jack.
Mute
Use the switch to mute. LED will indicate activation.
Boost
Use the switch for set boost level. LED will indicate activation.
Level control (0-9dB)
Important to set the sound system to accept your chosen maximum boost level.
Mic Match PRO
Match up you favourite instrument microphone and pedal effects, or to a DI, to use the full range of effects but keeping the original sound of your instrument. With 18V phantom power it can be used by condenser mics and most dynamic mics**
It has 1/4” Jack to Jack signal throughput to pedal effects, an adjustable volume boost foot-switch and a mute foot-switch. With just one 9V power unit (not supplied) Mic Match Pro can power up to five pedal effects with external distribution cable (not supplied).
**MMP is designed specifically for stage use, where condenser mics typically require only 9V to 12V phantom power. Well-known brands like DPA, Audio-Technica or AKG are optimized stage mics for lower phantom power voltages. MMP covers these needs and give to mics enough power. Most dynamic microphones will not be damaged by phantom power. If in doubt check with the manufacturers recommendations.
Kit includes: Preamp, 8cm (3.15 inch) of 3M velcro tape, Pouch, Sticker and Manual.
